FCA US RAM 1500 2017 Owner'S Manual Download Page 223

Page: 223 / 710

3. Push clamp wires up and under the flange of box (or

flange of Ram Box rail, if equipped) to the semi clamped
position.

4. Push clamp handles upward to the clamped position to

properly engage the clamps.

NOTE:

Once clamped, be sure the clamps are not partially

clamped to the truck bed flange.

Semi Clamped Position

Clamped Position

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

221

Summary of Contents for RAM 1500 2017







































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for RAM 1500 2017

Reviews:

FCA US RAM 1500 2017, Owner'S Manual, Page: 223 / 710

Search results

Summary of Contents for RAM 1500 2017

Reviews: