FCA US GRAND WAGONEER 2022 Owner'S Manual Download Page 223

Page: 223 / 432

MULTIMEDIA

221

My Profile

When the My Profile button is pressed on the touchscreen, the system displays options related to the vehicle’s profiles.
NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Language

This setting will change the language of the Uconnect system and Instrument

Cluster Display. The available languages are English, Italiano, Français, and

Español.

Display Mode

This setting will adjust the display for the radio to “Auto” or “Manual”.

“Manual” allows for more customization with the radio display.

Display Brightness Headlights On

This setting will allow you to set the brightness when the headlights are on. To

access this setting, Display Mode must be set to “Manual”. The “+” setting will

increase the brightness; the “-” will decrease the brightness.

Display Brightness Headlights Off

This setting will allow you to set the brightness when the headlights are off. To

access this setting, Display Mode must be set to “Manual”. The “+” setting will

increase the brightness; the “-” will decrease the brightness.

Set Theme

This setting will allow you to change the display theme.

Units

This setting will allow you to change the units. The available options are

“Speed” (MPH or km/h), “Distance” (mi or km), “Current Consumption” (MPG

[US], MPG [UK], L/100 km, or km/L), “Pressure” (psi, kPa, or bar), and

“Temperature” (°C or °F) units of measurement independently.

Touchscreen Beep

This setting will allow you to turn the touchscreen beep on or off.

Show Main Category Bar Labels

This setting will allow the main category bar labels to be shown on or off.

Navigation Next Turn Pop-ups Displayed In Cluster

This setting will display Navigation prompts in the Instrument Cluster Display.

22_WS_OM_EN_USC_t.book Page 221

Summary of Contents for GRAND WAGONEER 2022

















































































































































































































































































































































































































































Search results

Summary of Contents for GRAND WAGONEER 2022

Reviews:

Related manuals for GRAND WAGONEER 2022

Brands by name

Popular brands

FCA US GRAND WAGONEER 2022, Owner'S Manual

Search results

Summary of Contents for GRAND WAGONEER 2022

Reviews:

Related manuals for GRAND WAGONEER 2022

Brands by name

Popular brands