FCA US DODGE JOURNEY 2020, Owner'S Manual

Page: 82 / 404

80 GETTING TO KNOW YOUR VEHICLE
Seven Passenger System Features

A large built-in storage bin with a hinged hard-
cover located in the floor behind the third-row
passenger seats.

60/40 split second-row passenger seats with
fold flat feature, which allows for extended
cargo space. Refer to “Seats” in this chapter
for further information.

50/50 split third-row passenger seats with
fold flat feature, which allows for extended
cargo space. Refer to “Seats” in this chapter
for further information.

An optional front passenger seat with fold flat
feature, which extends cargo space even
further. Refer to “Seats” in this chapter for
further information.

Cargo tie-downs.
Retractable Cargo Area Cover
(Five Passenger Models) — If Equipped
NOTE:
The purpose of this cover is for privacy, not to
secure loads. It will not prevent cargo from
shifting or protect passengers from loose cargo.
The removable retractable cargo area cover
mounts in the cargo area behind the top of the
rear seats.
The cover, when extended, covers the cargo
area to keep items out of sight. Notches in the
trim panels near the liftgate opening secure the
extended cover in place.
The cover rolls away neatly inside its housing
when not in use. You can also remove the cover
from the vehicle to make more room in the
cargo area.
To Install The Cover:
1. Position the cover in the vehicle so that the
flat side of the housing faces upward.
2. Insert either the left or the right
spring-loaded post (located on the ends of
the cover housing) into the left attachment
point or the right attachment point (shown).
Installing Retractable Cargo Area Cover
3. Insert the spring-loaded post on the oppo-
site end of the cover housing into the
attachment point on the opposite side of
the vehicle.
20_JC_OM_EN_USC_t.book Page 80