FCA US DODGE JOURNEY 2020, Owner'S Manual

Page: 387 / 404

MULTIMEDIA 385
Natural Speech
Natural speech allows the user to speak
commands in phrases or complete sentences.
The system filters out certain non-word utter-
ances and sounds such as “ah” and “eh.” The
system handles fill-in words such as “I would
like to.”
The system handles multiple inputs in the same
phrase or sentence such as “make a phone
call” and “to Kelly Smith.” For multiple inputs in
the same phrase or sentence, the system iden-
tifies the topic or context and provides the asso-
ciated follow-up prompt such as “Who do you
want to call?” in the case where a phone call
was requested but the specific name was not
recognized.
The system utilizes continuous dialog; when the
system requires more information from the user
it will ask a question to which the user can
respond without pressing the Uconnect Voice
Command button.
Uconnect Voice Commands
The Uconnect Voice Command system under-
stands two types of commands. Universal
commands are available at all times. Local
commands are available if the supported radio
mode is active.
Start a dialogue by pushing the Uconnect Voice
Command button.
Changing The Volume
1. Start a dialogue by pushing the Voice
Command button.
2. Say a command (e.g., “Help”).
3. Use the ON/OFF VOLUME rotary knob to
adjust the volume to a comfortable level
while the Voice Command system is
speaking. Please note the volume setting
for Voice Command is different than the
audio system.
Starting Voice Recognition (VR) Session In
Radio/Player Modes
In this mode, you can say the following
command.
NOTE:
The commands can be said on any screen when
a call is not active after pushing the Uconnect
Voice Command button.
Source
To switch to the audio source, say “Change
source to Disc” for example. This command can
be given in any mode or screen:

“Track” (#) (to change the track)
9
20_JC_OM_EN_USC_t.book Page 385