FCA US DODGE JOURNEY 2020, Owner'S Manual

Page: 374 / 404

372 MULTIMEDIA
When connecting an external source to the AUX
input, be sure to follow the standard color
coding for the VES jacks:
NOTE:
Certain high-end video games consoles will
exceed the power limit of the vehicle's power
inverter. Refer to the Power Inverter section
within “Internal Equipment” in “Getting To Know
Your Vehicle”.
Ensure the remote control channel selector
switch and headphone switch (IR channel) are
the same number.
Using The Remote Control
1. Push the MODE button on the Remote
Control.
2. While looking at the video screen, highlight
VES AUX 2, by either pushing Up/Down/
Left/Right buttons or by repeatedly pushing
the MODE button, then push ENTER on the
Remote Control.
Using The Touchscreen Radio Controls
1. Press the MORE button on the touch-
screen.
2. Press the Rear Entertainment button on the
touchscreen to display the Rear Entertain-
ment Controls.
3. If the Rear Entertainment is turned off,
press the Power button on the touchscreen.
4. Press the 1 or 2 button on the touchscreen
for the channel desired and press the
Source button on the touchscreen to select
the desired mode.
Listen To An Audio Source On Channel 2
While A Video Is Playing On Channel 1
Ensure the Remote Control and Headphone
switch is on Channel 2.
Using The Remote Control
1. Push the MODE button on the Remote
Control and the Mode Select Screen will
display, unless a video is playing, then only
a small banner will appear on the bottom
of the screen.
2. While looking at the video screen, either
press Up/Down/Left/Right on the Remote
Control to highlight the desired audio
source or repeatedly push the MODE button
on the remote until the desired audio
source appears on the screen.
Using The Touchscreen Radio Controls
1. Press the MORE button on the touch-
screen.
2. Press the Rear Entertainment button on the
touchscreen to display the Rear Entertain-
ment Controls.
3. If the Rear Entertainment is turned off,
press the Power button on the touchscreen.
4. Press the 1 or 2 button on the touchscreen
for the channel desired and press the
Source button on the touchscreen to select
the desired mode.
Play A DVD Using The Touchscreen Radio
Insert the DVD with the label facing up. The
radio automatically selects the appropriate
mode after the disc is recognized and displays
the menu screen or starts playing the first track.
20_JC_OM_EN_USC_t.book Page 372