FCA US DODGE JOURNEY 2020 Owner'S Manual Download

Page: 371 / 404

MULTIMEDIA

369

Garmin® is a trademark of Garmin® Ltd. or its

subsidiaries, registered in the USA and other

countries. This trademark may not be used

without the express permission of Garmin®. All

other company names and trademarks

mentioned or referenced in this documentation

are the properties of their respective owners. All

rights reserved.

More Mode

“More” Main Menu

The More Main Menu consists of the following

options:



Settings



SiriusXM® Travel Link (if equipped)

Refer to the “Navigation Mode” in this

section for more information.

Settings Main Menu

Radio Settings Main Menu

Press the Settings button to display the list of

available settings.
Refer to “Uconnect Settings” in this section for

further information.

Accessibility
Accessibility is a feature of the DVD system that

announces a function prior to performing the

action. The first time a button is pressed the

system will identify the button, and will enact

the function of the button the second time it is

pressed. For further information, refer to

“Uconnect Settings” in “Multimedia.”

STEERING WHEEL AUDIO CONTROLS — IF

EQUIPPED

The remote sound system controls are located

on the rear surface of the steering wheel. Reach

behind the wheel to access the switches.

Steering Wheel Audio Controls

(Back View Of Steering Wheel)

The right-hand control is a rocker-type switch

with a push-button in the center and controls

the volume and mode of the sound system.

Pushing the top of the rocker switch increases

the volume, and pushing the bottom of the

rocker switch decreases the volume.

20_JC_OM_EN_USC_t.book Page 369

Summary of Contents for DODGE JOURNEY 2020





















































































































































































































































































































































































































Search results

Summary of Contents for DODGE JOURNEY 2020

Reviews:

Related manuals for DODGE JOURNEY 2020

Brands by name

Popular brands

FCA US DODGE JOURNEY 2020, Owner'S Manual

Search results

Summary of Contents for DODGE JOURNEY 2020

Reviews:

Related manuals for DODGE JOURNEY 2020

Brands by name

Popular brands