FCA US DODGE CHARGER 2021 Owner'S Manual Download Page 63

Page: 63 / 356

GETTING TO KNOW YOUR VEHICLE

Sunglasses Bin Door

At the front of the console a compartment is

provided for the storage of a pair of sunglasses.

The storage compartment access is a “push/

push” design. Push the chrome pad on the door

to open. Push the chrome pad on the door to

close.

Sunglasses Bin Door

USB/AUX C

ONTROL

This feature allows an external USB device to be

plugged into the USB port.
Plugging in a smartphone device to a USB port

may activate Android Auto™ or Apple CarPlay®

features, if equipped. For further information,

refer to “Android Auto™” or “Apple CarPlay®” in

the Owner’s Manual Supplement.

AUX/USB Ports

Located on the rear of the front center console

are dual USB “Charge Only” ports. The USB

“Charge Only” ports will recharge battery

operated USB devices when connected.

Rear USB Charging Ports

1 — USB 1 Port
2 — AUX Jack
3 — USB 2 Port

21_LD_OM_EN_USC_t.book Page 61

Summary of Contents for DODGE CHARGER 2021





































































































































































































































































































































































Search results

Summary of Contents for DODGE CHARGER 2021

Reviews:

Related manuals for DODGE CHARGER 2021

Brands by name

Popular brands

FCA US DODGE CHARGER 2021, Owner'S Manual

Search results

Summary of Contents for DODGE CHARGER 2021

Reviews:

Related manuals for DODGE CHARGER 2021

Brands by name

Popular brands