FCA US DODGE CHARGER 2021 Owner'S Manual Download Page 26

Page: 26 / 356

GETTING TO KNOW YOUR VEHICLE

NOTE:



After pushing the door handle button, you

must wait two seconds before you can lock or

unlock the doors, using either Passive Entry

door handle. This is done to allow you to

check if the vehicle is locked by pulling the

door handle without the vehicle unlocking.



If Passive Entry is disabled using the

Uconnect Settings, the key protection

described in "Frequency Operated Button

Integrated Key (FOBIK-Safe)" remains active/

functional.



The Passive Entry system will not operate if

the key fob battery is depleted.

To Unlock/Enter The Trunk
With a valid Passive Entry key fob within 5 ft

(1.5 m) of the deck lid, push the button located

on the right side of the deck lid.

Trunk Passive Entry Button

NOTE:

If you inadvertently leave your vehicle's Passive

Entry key fob in the trunk and try to close the

deck lid, the deck lid will automatically unlatch,

unless another one of the vehicle’s Passive

Entry key fobs is outside the vehicle and within

5 ft (1.5 m) of the deck lid

page 341.

UTOMATIC

NLOCK

OORS

XIT

The doors will unlock automatically on vehicles

with power door locks after the following

sequence of actions:

1. The Automatic Unlock Doors On Exit

feature is enabled within Uconnect

Settings

page 138.

2. All doors are closed.

3. The gear selector was not in PARK, then is

placed in PARK.

4. The driver door is opened.

5. The doors were not previously unlocked.

UTOMATIC

OOR

OCKS

— I

QUIPPED

The auto door lock feature default condition is

enabled. When enabled, the door locks will lock

automatically when the vehicle's speed exceeds

15 mph (24 km/h). The auto door lock feature

is enabled/disabled within Uconnect Settings

page 138.

HILD

-P

ROTECTION

OOR

OCK

YSTEM

— R

EAR

OORS

To provide a safer environment for small

children riding in the rear seats, the rear doors

are equipped with a Child-Protection Door Lock

system.
To use the system, open each rear door, use a

flat blade screwdriver (or emergency key) and

rotate the dial to the lock or unlock position.

21_LD_OM_EN_USC_t.book Page 24

Summary of Contents for DODGE CHARGER 2021





































































































































































































































































































































































Search results

Summary of Contents for DODGE CHARGER 2021

Reviews:

FCA US DODGE CHARGER 2021, Owner'S Manual, Page: 26 / 356

Search results

Summary of Contents for DODGE CHARGER 2021

Reviews: