FAZUA RIDE 60, Original Instructions Manual

Page: 89 / 96

Original instructiOns | English
89
►
Check the battery for visible damage, such as cracks or burn
marks, before each insertion.
►
Make sure that the interfaces on the battery are free of dirt before
using it.
1. Check the battery for visible damage before insertion (visual check).
2. Place the battery with the interface
[C.2] first on the corresponding interface
on the e-bike.
Click
C.2
3. Swing the upper end of the battery into the down tube of the e-bike.
The battery is automatically locked in place when the two interfaces on the
battery and e-bike are correctly interlocked and the battery is swiveled fully
into the designated receptacle on the down tube. An audible engagement
sound ("click") is heard when the device engages.
Contact an authorized specialist if the battery cannot be inserted/if the
battery does not (audibly) engage on the e-bike.
27.1.2 Removing the battery
WARNING
Risk of burns and injury!
The cooling unit on the drive unit can become very hot during opera-
tion and you may burn yourself when touching it. You may trap your
fingers when removing the battery without due care.
►
Be careful when handling the battery. If necessary, allow the drive
unit to cool down completely first.