Original instructions | English
19
4
USE
This chapter describes chronologically how to proceed when using the drive
system.
→
It is essential that you also read the detailed descriptions in the section relating
to the component in question:
• before you use your e-bike equipped with the FAZUA RIDE 50 drive system
for the first time,
• if you are unsure how to use it,
• if you have problems performing the steps as described here.
4.1 Inserting and removing components
4.1.1 Inserting the BATTERY into the DRIVEPACK
More detailed information can be found
→
in chapter 27.1 “Checking and switching on
BATTERY” and in chapter 27.2 “Inserting the BATTERY into the DRIVEPACK”.
On delivery, the BATTERY may only be pre-charged.
→
Fully charge the BATTERY before inserting it into the DRIVEPACK for
the first time.
1. Check the BATTERY for visible damage.
2. Press the on/off button of the BATTERY 1× to turn on the BATTERY.
3. Attach the BATTERY to the battery compartment of the DRIVEPACK with the
connector contact first.
D
A
4. Carefully insert the BATTERY fully into the battery holder.
The BATTERY will lock automatically if you insert it correctly. If the BATTERY
does not lock into place, repeat the procedure. Do not use the drive system if
the BATTERY cannot be locked in place.
