Fayat Dynapac F80W, Operating Manual

Page: 97 / 198

91 F80W
451671A
17
18
D451042
OPERATING MANUAL
2.5.17 Conveyor
It serves for distributing the material to augers.
Conveyor movement directions:
• When distributing the material, the conveyor moves in the
opposite direction of the machine travel.
• When reversing, the material conveyor moves in the direc-
tion of the machine travel.
• The conveyor direction can be affected by the conveyor di-
rection switch (18).
Operating modes:
• Automatic mode:
- When the machine stops, the material distribution will
stop.
- The material limit switch monitors the amount of the de-
livered material and as needed, stops or starts the move-
ment of the conveyor.
- The mode is only active during machine travel.
- The conveyor direction can be affected by the conveyor
direction switch (18).
• Manual mode:
- Monitor the amount of the material and if necessary ad-
just the direction of the conveyor by the conveyor direc-
tion switch (18).
Operating the conveyor:
• Automatic mode:
- For the automatic mode, switch over the material deliv-
ery operating mode switch MAN/AUT (17) to the auto-
matic mode position.
- For material distribution, switch over the conveyor di-
rection switch (18) to the lower position.
- For reverse run, switch over the conveyor direction switch
(18) to the upper position.
- To stop the conveyor, switch over the conveyor direction
switch (18) to the central position.
• Manual mode:
- For the manual mode, switch over the material delivery
operating mode switch MAN/AUT (17) to the manual
mode position.
- For material distribution, switch over the conveyor di-
rection switch (18) to the lower position.
- For reverse run, switch over the conveyor direction switch
(18) to the upper position.
- To stop the conveyor, switch over the conveyor direction
switch (18) to the central position.
Caution! When the conveyor direction switch (18) is activat-
ed in the lower position, the conveyor moves in the manual
mode even if the machine is not moving.
Caution! When the conveyor direction switch (18) is activat-
ed to the upper position, the conveyor starts moving in the
automatic mode only after the machine starts moving.