Fayat Dynapac F80W, Operating Manual

Page: 38 / 198

32 F80W
2.1 Main safety precautions
2.1.4 Machine operator's obligations
Before starting operation of the machine, the driver is obliged
to get familiar with instructions stated in the documentation
supplied together with the machine, especially with safety pre-
cautions, and strictly observe the instructions. The same also
applies to personnel assigned to maintain, adjust and repair the
machine.
The driver must not drive the machine if he does not under-
stand any part of the manuals. Contact your local dealer or the
machine manufacturer.
The driver must not drive the machine unless he is fully familiar-
ized with all functions and working and operating elements and
knows exactly how to operate the machine.
The driver is obliged to follow the safety and operation signs
placed on the machine and keep them legible.
The machine operator shall know exact routes of gas lines, po-
table water lines, pipelines, sewerage, electric and telephone
lines, both aerial and ground, and information about other po-
tential obstacles.
The machine driver must always maintain a safe three-point
contact with the tilting platform and the handle.
When finding out any health hazard, life hazard to persons, haz-
ard to property, failures, during hardware accidents, or when
finding symptoms of such hazards during operation, the driver
must stop his/her work and secure the machine against unde-
sired starting, communicate this to a person accountable, and,
to a possible extent, notify all the persons exposed to such haz-
ard.
Before starting operation of the machine, the driver is obliged to
get familiar with records and operational deviations found dur-
ing the previous work shift, which are recorded in the service
book delivered with the machine.
Before starting the work, the driver is obliged to inspect the
machine and its accessories and to check control elements and
communication and safety equipment for functioning accord-
ing to the manual. When he finds defects that might endanger
the safety of work and is not able to repair it, then he must not
put the machine into operation and must report the defect to a
responsible worker.
Before starting any operation, the driver must check that a first
aid kit with prescribed contents is available, as well as a fire ex-
tinguisher, and find out about the possibilities of rescuing, avail-
ability of medical assistance and fire brigade.
If the driver finds a defect during operation of the machine, he
must park the machine at a safe place and remove the defect.
During operation, the driver must observe operation of the ma-
chine and record any detected defects into the service book.
The driver must maintain a service book, which is intended for
records of the acceptance and handover of the machine carried
out between drivers, for defects and repairs done during opera-
tion and for keeping files of serious events during the work shift.
Before the engine is put into operation, the controls must be in
zero positions and no persons are allowed to stay in the danger
zone of the machine.
Always before starting the engine, the driver is obliged to notify
others by means of a sound signal each time the machine is put
into operation.
Before putting the machine into operation, the driver must
check the brakes and steering for functioning.
After a warning alarm, the operator may put the machine into
operation only when all workers have left the endangered area
and are at a safe distance from the machine. In case of workplac-
es with unclear arranged, the machine can be put into operation
only after expiration of the period of time needed for people
to leave the dangerous area and after assuring inspection and
connection between an appointed worker and the machine op-
erator. During operation of the machine, it is necessary to follow
safety instructions and not to carry out any activity that might
endanger the work safety. The driver must be fully engaged in
steering the machine.
The driver must comply with the technological procedure of
works or instructions of a responsible worker.
When driving the machine within the workplace, the driver
must adapt the driving speed to terrain conditions, the work
performed and weather conditions. Watch continuously the
clearance to avoid collision with any obstruction.
If the driver finishes or interrupts machine operation and leaves
the machine, he must carry out safety measures against unau-
thorized use of the machine and undesired start up. He must
take the key out from the ignition box, lock the main dashboard
of the machine or the cabin of the machine and other lockable
parts of the machine and disconnect the wiring by means of
a disconnecter.
When the operation is finished, the driver must park the ma-
chine in a suitable area (on a flat, solid surface) so as not to en-
danger stability of the machine; the machine must not interfere
with traffic roads, must not be exposed to falling objects, e.g.
rocks, and must be protected against any other natural disaster,
e.g. floods and landslides.
When parking the machine on roads, measures according to na-
tional road traffic regulations shall be taken. The machine must
be marked properly.
After the work with the machine is finished, it is necessary to
record all defects, damages and repairs of the machine into the
service book. When drivers take turns, the driver is obliged to
report any identified facts to the following driver.
The driver must use personal protective equipment, work
clothes, work shoes, a warning vest, a protective helmet, hear-
ing protection and a dust protection mask.
During maintenance of the machine, lubrication and replace-
ment of operating fluids, hands must be protected with protec-
tive gloves and eyes with safety glasses or a safety shield.
The driver must carry out the machine maintenance in compli-
ance with instructions specified in this Operating manual.
The driver must equip the machine with accessories and equip-
ment as prescribed.
The driver must keep the driver’s stand, foot rests and walkways
clean.
The driver must keep the machine clean, free of oil contami-
nants and inflammable materials.