Fayat Dynapac F80W, Operating Manual

Page: 37 / 198

31 F80W
OPERATING MANUAL
2.1.3 Requirements for qualified personnel
All activities on the machine may only be performed by qualified, instructed and trained personnel.
Qualified, instructed and trained personnel shall:
• be over 18 years old,
• trained in the provision of first aid and be able to provide it,
• be familiarized with this Operating Manual,
• know relevant and related safety instructions.
The mounting of additional equipment, maintenance and setting of mechanical and electronic parts of the machine may only be
performed by persons with respective authorisations and qualifications and in compliance with all regulations and safety precautions
according to this Operating Manual in compliance with relevant national regulations.
Qualified personnel:
QUALIFICATION BASIC PROFESSIONAL REQUIREMENTS
Machine operator
Professionally trained for operating the machine.
Professional knowledge of instructions given in this Operating Manual.
Professional knowledge of procedures concerning simple setting of functions of the machine.
Professional knowledge of procedures for handling and use of gas bottles.
Professional knowledge of procedures in case of fire and extinguishing the machine equipped with
a gas bottle.
Professional knowledge of procedures for the use of the prescribed fire extinguisher.
Professional knowledge of procedures for first aid provision in case of gas leakage from the system
and subsequent harm to people.
Professional knowledge of basic procedures for removal of defects when the machine is stopped for
simple repairs.
Professional knowledge of basic procedures of machine maintenance.
Technical administrator
Serviceman of mechanical
parts
Professional knowledge of the machine and its parts (achieved through training) to be able to adjust
and repair the machine.
Technical administrator
Electrical system and
electronics serviceman
Professional knowledge of the machine and its parts (achieved through training) to be able to per-
form maintenance and repairs of electrical systems and electronics of the machine.
Service technician
Qualified service technician, professionally trained by a dealer or DYNAPAC authorised service centre.
They perform complicated repairs, adjustments or testing of the machine at the customer.