Fayat Dynapac F80W, Operating Manual

Page: 119 / 198

113 F80W
D451108
1
1 300 kg
(2 866 lb)
Lmin = 2 m
(Lmin = 4,3 ft)
Lmin = 2 m
(Lmin = 4,3 ft)
451702
OPERATING MANUAL
2.7.3 Loading the machine with a crane
For loading with a crane, the machine is provided with lifting
lugs (1).
When loading the machine, use a crane with a sufficient load
capacity.
When loading and unloading the machine or its parts, it is nec-
essary to observe relevant national regulations.
When loading the machine, another person must be
present to give hand signals to the machine operator.
See the list of hand signals in chapter 2.1.9.
Observe safety regulations while loading and unloading.
Use a crane with a sufficient load capacity.
Use corresponding and unbroken hoisting slings with
a sufficient load capacity.
The machine must be tied to the lifting lugs (1).
The machine must be tied for loading and unloading
with a crane only by a trained person.
Do not enter under the suspended load.
When loading the machine with a crane, no one is al-
lowed to be in the loading area of the machine. The safe
distance is at least 5 metres from the loaded machine.