manualshive.com logo in svg

Fayat DYNAPAC DRP45DX, Original Operating Instructions

Share
Download
Fayat DYNAPAC DRP45DX Original Operating Instructions Download Page 23

3.4  Handling fuels and lubricants

3.4.1  Preliminary remarks

The operating company must ensure that all professional users

have read and follow the corresponding safety data sheets for the

individual fuels and lubricants.

Safety data sheets provide valuable information about the following

characteristics:

n

name of substance

n

possible dangers

n

composition / information on constituents

n

first-aid measures

n

fire fighting measures

n

measures in case of accidental release

n

handling and storage

n

limitation and monitoring of exposure / personal protective

equipment

n

physical and chemical properties

n

stability and reactivity

n

toxicological data

n

environmental data

n

notes on waste disposal

n

information on transport

n

legislation

n

other data

Concerning your safety – Handling fuels and lubricants

 

DRP45DX

 

23

Summary of Contents for DYNAPAC DRP45DX















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands