Fayat DYNAPAC DRP40DX, Operating Instructions Manual

Page: 81 / 110

12. Insert the oil filter (2) into the housing and press it against the
end stop.
13. Before tightening the screw (1) make sure that the tensioning
springs touch the oil filter with both ends.
14. Tighten the screw.
15. Fill in fresh engine oil up to the bottom edge of the filling
opening.
16. After a short test run check the oil level on the dipstick; if nec-
essary, top up to the top dipstick mark.
17. Check oil filter and drain plug for leaks.
18. Dispose of oil in an environmentally friendly way.
8.9.4 Replacing the fuel filter
NOTICE!
Danger of engine damage!
– Ensure strict cleanliness! Thoroughly clean the
area around the fuel tank beforehand.
– Never operate the engine after having removed
the fuel filter.
Protective equipment: n Working clothes
n Protective gloves
1. Park the machine in secured condition Ä Chapter 6.4
„Parking the machine in secured condition“ on page 55 .
2. Clean the area around the tank filler cap.
3. Remove the tank filler cap.
Fig. 73
Filling in engine oil
Fig. 74
Concluding work
Maintenance – Annually / every 250 operating hours
DRP40DX 81