Fayat DYNAPAC DRP40DX, Operating Instructions Manual

Page: 75 / 110

8.9 Annually / every 250 operating hours
8.9.1 Replacing the V-belt
Protective equipment: n Working clothes
n
Protective gloves
1. Park the machine in secured condition Ä Chapter 6.4
„Parking the machine in secured condition“ on page 55 .
2. Allow the engine to cool down.
3. Unscrew the V-belt guard (1).
4. Unscrew the guard (1).
5. Unscrew the V-belt pulley (1).
6. Replace the V-belt (3).
7. If necessary, reassemble the spacers (2) that may have been
removed.
8. Fasten the V-belt pulley, tightening torque: 35 Nm (26 ft
·
lbf).
Fig. 58
B-692-0206
1
Fig. 59
2
B-692-0207
1
3
Fig. 60
Maintenance – Annually / every 250 operating hours
DRP40DX 75