Fayat Dynapac DFP7, Operating And Maintenance Instructions Manual

Page: 81 / 110

8.7 Semi-annually
8.7.1 Changing the engine oil
NOTICE!
Danger of engine damage!
– Change the oil only with the engine at oper-
ating temperature.
– Use only oil of the permitted specification
Ä Chapter 8.2.1 ‘Engine oil’ on page 73 .
– Filling quantity:
Ä
Chapter 8.3 ‘List of fuels and
lubricants’ on page 75
Protective equipment: n Working clothes
n Safety shoes
n Protective gloves
1. Park the machine safely
Ä
Chapter 6.5 ‘Parking the machine
in secured condition’ on page 63 .
2.
WARNING!
Danger of burning on hot components!
– Wear your personal protective equipment
(protective gloves, protective clothing).
– Avoid touching hot components.
Clean the area around oil dipstick (1) and drain plug (3).
3. Unscrew the oil dipstick.
4. Unscrew the drain plug and collect any oil running out.
5. Clean the oil drain plug and screw it back in with a new seal
ring (2).
6. Fill in fresh oil up to the bottom edge of the filler bore.
7. Push the oil dipstick (1) back in.
8. Check for leaks after a short test run.
9. Check the oil level on the dipstick, correct if necessary.
10. Dispose of oil in line with environmental regulations.
B-SYM-1078
Fig. 64
B-541-0028
1
2
3
Fig. 65
B-834-0026
MAX
MIN
1
Fig. 66
Maintenance – Semi-annually
DFP7 81