Fayat Dynapac DFP7, Operating And Maintenance Instructions Manual

Page: 63 / 110

6.5 Parking the machine in secured condition
Components can be very hot during or immediately after operation.
WARNING!
Danger of burning on hot components!
– Wear your personal protective equipment (pro-
tective gloves, protective clothing).
– Avoid touching hot components.
Protective equipment: n Hearing protection
n Working clothes
n Protective gloves
n Safety shoes
1. Park the machine on level and firm ground.
2. Set the throttle lever to “MIN” position (idle speed).
3.
NOTICE!
Danger of engine damage!
– Do not shut down the engine all of a
sudden from full load speed, but let it idle
for about two minutes.
Switch the engine stop switch to “OFF” position.
ð
The engine is shut down.
B-834-0017
MAX MIN
1-2 Min.
Fig. 48
B-834-0080
OFF
0
ON
I
Fig. 49
Operation – Parking the machine in secured condition
DFP7 63