Fayat Dynapac DFP6, Operating Instruction

Page: 102 / 116

8.9.7 Measures for longer shut-down periods
8.9.7.1 Measures before shutting down
DANGER!
Danger to life caused by explosive gas-air
mixes!
– Do not allow gasoline to come into contact with
hot components.
– Smoking and open fire is prohibited.
– Keep away from heat sources, sparks and
other sources of ignition.
– Do not spill any gasoline.
If the machine is shut down for a longer period of time, e.g. winter
season, the following work must be carried out.
Depending on weather conditions these conservation measures
will protect the machine for approx. 6 to 12 months.
1. Park the machine in secured condition
Ä
Chapter 6.6
„Parking the machine in secured condition“ on page 67 .
2. Allow the engine to cool down for at least 30 minutes.
3. Clean the machine thoroughly.
4. Change the engine oil
Ä
Chapter 8.7.1 „Changing the engine
oil“ on page 85 .
5. Use fuel stabilizer or drain off fuel completely.
1. Mix fresh fuel with fuel stabilizer (follow the instructions of the
manufacturer).
2. Empty the fuel tank and fill it with the prepared fuel mix.
3. Start the engine and run the machine for approx. 10 minutes
in the open.
4. Park the machine in secured condition.
1. Close the fuel valve.
Using fuel stabilizer
Emptying the fuel tank.
Fig. 103
Maintenance – As required
DFP6 102