manualshive.com logo in svg

Fayat BOMAG BW 124 PDH-5, Operating Instruction, Maintenance Instruction

Share
Download
Fayat BOMAG BW 124 PDH-5 Operating Instruction, Maintenance Instruction Download Page 198

9.3 

Fuse assignment

9.3.1 

Notes on safety

WARNING!
Danger of injury by fire in the

machine!

– Do not use fuses with higher

ampere ratings and do not bridge

fuses.

9.3.2 

Central electrics

The central electrics are to the right of the driv-

er’s stand underneath the cover.

Fuse

Amperage

Designation

F03

10 A

Vibration

F04

7.5 A

Instrument cluster

F05

10 A

12-V socket

F11

15 A

Working head lights, rear

F23

10 A

Warning horn

F48

40 A

Preheating system

F50

25 A

BOMAG TELEMATIC (potential 30)

F68

10 A

Reserve (potential 30)

F103

10 A

Reserve (potential 15)

F119

10 A

Engine control unit

F139

30 A

Engine control unit

F153

10 A

Control (potential 15)

F154

10 A

BOMAG TELEMATIC (potential 30)

F156

15 A

Working head lights, front

F157

30 A

Starter

Troubleshooting – Fuse assignment

 

BW 124 PDH-5

 

198

Summary of Contents for BOMAG BW 124 PDH-5



















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands