Fayat BOMAG BW 124 PDH-5, Operating Instruction, Maintenance Instruction

Page: 159 / 210

3. Loosen the tensioning screw (1) and the
screw (2) on the generator.
4. Relieve and remove the V-belt.
5. Assemble a new V-belt at the generator.
6. Tension the V-belt to the specified value
Ä
Chapter 8.8.3 „Checking, tensioning the
V-belt“ on page 147 .
7. Retighten clamping screw (1) and screw
(2).
8.9.4
Checking the anti-freeze concentration and the condition
of the coolant
Protective equip-
ment:
n Working clothes
n Protective gloves
n
Safety goggles
1. Park the machine in secured condition
Ä
Chapter 6.6 „Parking the machine in
secured condition“ on page 106 .
2. Allow the engine to cool down.
3. Remove the cap and check the coolant
level and anti-freeze concentration with a
conventional tester.
4. Check the condition of the coolant.
5. Thoroughly flush the cooling system if the
coolant is contaminated by corrosion resi-
dues or other suspended matter
Ä
Chapter
8.11.2 „Changing the coolant“ on page 180 .
6. Close the cover again.
8.9.5 Checking the hydraulic lines
This work must only be performed by an
expert / qualified person!
Fig. 129
B-586-0284
Fig. 130
Maintenance – Every 500 operating hours
BW 124 PDH-5 159