Fayat BOMAG BW 120 AD-5, Operating Instruction

Page: 41 / 210

3.6 Starting up the machine
3.6.1 Prior to commissioning
Only use machines which have been serviced
at regular intervals.
Become acquainted with the equipment, the
indicators and control elements, the working
principle of the machine and the working area.
Use your personal protective equipment (hard
hat, safety boots, if necessary also goggles
and ear protection).
Make sure that the machine is equipped with
the required lighting according to the require-
ments of the application.
Do not take any loose objects with you or
fasten them to the machine.
Before mounting the machine check whether:
n
persons or obstructions are beside or under
the machine;
n
the machine is free of oily and combustible
materials;
n
all access steps, grips and platforms are free
of obstacles, grease, oils, fuel, dirt, snow
and ice;
n
all safety elements are in place;
n
all maintenance flaps and doors are closed
and locked.
Climb onto or off the machine only when the
machine is standing. Use the existing access
steps and grips.
When climbing on and off the machine use the
three-point support method: Always keep two
feet and one hand or one foot and two hands
on the machine.
Never jump off the machine.
Before commissioning, carry out all required
visual inspections and function tests.
Concerning your safety – Starting up the machine
BW 120 AD-5 41