Fayat BOMAG BVP 10/36 Operating Instruction Download Page 87

Page: 87 / 112

8.8.5 Replacing the air filter

NOTICE!
Danger of engine damage!

–

Do not start the engine after having removed

the air filter.

Protective equipment:

Working clothes

Safety shoes

Protective gloves

Park the machine safely

Chapter 6.5 „Parking the machine

in secured condition“ on page 62

Allow the engine to cool down.

Unscrew wing nut (1) and remove cover (2).

Clean the cover.

Unscrew wing nut (3) and remove filter element (4).

Check the rubber seal (5), replace if necessary.

The rubber seal frequently sticks to the filter

element.

Replace the filter element consisting of paper and foam

insert.

Fig. 82

Fig. 83

Maintenance – Annually

BVP 10/36

Summary of Contents for BOMAG BVP 10/36

















































































































Search results

Summary of Contents for BOMAG BVP 10/36

Reviews:

Related manuals for BOMAG BVP 10/36

Brands by name

Popular brands

Fayat BOMAG BVP 10/36, Operating Instruction

Search results

Summary of Contents for BOMAG BVP 10/36

Reviews:

Related manuals for BOMAG BVP 10/36

Brands by name

Popular brands