8.9 As required
8.9.1 Cleaning the water spraying system
Optional equipment
1.
Park the machine safely
Chapter 6.5 ‘Parking the machine
in secured condition’ on page 56
2.
Remove the cap.
3.
Remove the rubber caps from the spray tubes.
4.
Switch on the water spraying system.
5.
Let all water flow out.
6.
Flush the water tank with a strong water jet, until all dirt has
run out.
7.
Plug the rubber caps back on the spray tubes.
8.
Switch the water spraying system off again.
9.
Fill the water tank with clean water and close the cap.
8.9.2 Cleaning the cooling fins and the cooling air intake openings
How dirty the cooling fins and cooling air intake
openings are depends very much on the daily
operating conditions; clean daily if necessary.
Protective equipment:
n
Working clothes
n
Protective gloves
n
Safety goggles
1.
Park the machine in secured condition
‘Parking the machine in secured condition’ on page 56
2.
Allow the engine to cool down.
Water
B-692-0230
Fig. 107
B-692-0234
Fig. 108
Maintenance – As required
BPR 25/40 D
91
Go
to
Discount-Equipment.com
to
order
your
parts