manualshive.com logo in svg

Fayat Bomag BP 25/50, Operating Instruction, Maintenance Instruction

The Fayat Bomag BP 25/50 is a heavy-duty construction equipment perfectly designed for efficient and reliable performance. With our user-friendly manual, you can easily access comprehensive Operating and Maintenance Instructions. Download it for free from our website manualshive.com and keep your equipment running smoothly.

Share
Download
background image

8.10.3 

Measures to be applied for longer periods of rest

8.10.3.1 

Measures before shutting down

DANGER!
Danger to life caused by explosive gas-air mixes!

–

Do not allow gasoline to come into contact with hot

components.

–

Smoking and open fire is prohibited.

–

Keep away from heat sources, sparks and other

sources of ignition.

–

Do not spill any gasoline.

If the machine is shut down for a longer period of time, e.g. winter

season, the following work must be carried out.

Depending on weather conditions these conservation measures

will protect the machine for approx. 6 to 12 months.

1.

Park the machine in secured condition

Ä

 Chapter 6.5 ‘Park

the machine in secured condition.’ on page 56

.

2.

Allow the engine to cool down for at least 30 minutes.

3.

Clean the machine thoroughly.

4.

Change the engine oil

Ä

 Chapter 8.8.1 ‘Changing the engine

oil’ on page 75

.

5.

Use fuel stabilizer or drain off fuel completely.

1.

Mix fresh fuel with fuel stabilizer (follow the instructions of the

manufacturer).

2.

Empty the fuel tank and fill it with the prepared fuel mix.

3.

Start the engine and run the machine for approx. 10 minutes

in the open.

4.

Park the machine in secured condition.

1.

Close the fuel valve.

Using fuel stabilizer

Emptying the fuel tank.

Fig.  87

Maintenance – As required

 

BP 25/50

 

90

Go 

to 

Discount-Equipment.com 

to 

order 

your 

parts

Summary of Contents for Bomag BP 25/50





































































































Reviews:

No comments

Related manuals for Bomag BP 25/50

Masalta EMR85M Instruction Manual preview
EMR85M
Brand: Masalta Pages: 15

Brands by name

Popular brands

Load more brands