Fayat Group DYNAPAC SC2500WS, Operating Instructions Manual

Page: 419 / 594

F 40 7
Drive chains of the
augers (3)
To
check the chain tension
:
- Manually turn both augers to the right
and left. In this case, movement clearance (C) at the augers' outer circumference
should be 10 mm.
f Risk of injury due to sharp-edged parts!
To
re-tension
the chains
- Release the mounting screws (A).
- Set the chain tension correctly using
the threaded pins (B):
- Tighten the threaded pins to 20 Nm
using a torque wrench.
- Subsequently loosen the threaded
pins again by one full revolution.
- Retighten the bolts (A).
C
A
A
B