Fayat Group DYNAPAC S100, Operation & Maintenance Manual

Page: 21 / 101

P a g e 21 | 101
SERVICING AND SETTINGS

Disconnect the spark plug wire or wires before starting any servicing operations.

Do not dismantle the machine without first having checked for residual hydraulic
pressure that could cause the sudden movement of parts.

Keep all nuts, bolts and screws correctly tightened to make sure the machine is in
a safe working condition.

Replace worn, damaged or defective parts. For better results, always use spare parts
recommended by the manufacturer to maintain the warranty.
Liquid levels
Liquid levels must be checked with the machine levelled, height index on 0 and gates closed.

Check the engine oil (refer to Honda manual – attached):
The engine oil level is checked with the engine cold, engine horizontal and the
dipstick placed, not screwed.

Check the hydraulic liquid level:
The oil level should be visible through the viewing glass.