manualshive.com logo in svg

Fayat Group DYNAPAC DRP25D, Original Operating Instructions, Page: 25 / 118

Share
Download
Fayat Group DYNAPAC DRP25D Original Operating Instructions Download Page 25

3.4.3  Safety regulations and environmental protection regulations for handling oil

WARNING!
Danger of burning by ignited oil!

–

Do not allow oil to come into contact with hot

components.

–

Smoking and open fire is prohibited!

–

Wear your personal protective equipment (pro-

tective gloves, protective clothing).

CAUTION!
Health hazard caused by contact with oil!

–

Wear your personal protective equipment (pro-

tective gloves, protective clothing).

–

Do not inhale any oil vapours.

–

Avoid contact.

CAUTION!
Danger of slipping on spilled oil!

–

Immediately bind spilled oil with an oil-binding

agent.

ENVIRONMENT!
Oil is an environmentally hazardous substance!

–

Always keep oil in proper containers.

–

Immediately bind spilled oil with an oil-binding

agent.

–

Dispose of oil and oil filter according to regula-

tions.

Fig.  5

Concerning your safety – Handling fuels and lubricants

 

DRP25D

 

25

Summary of Contents for DYNAPAC DRP25D























































































































Reviews:

No comments