Fayat Group BOMAG BW 213 D-5, Operating Instruction, Maintenance Instruction

Page: 55 / 222

Do not step in front of or behind the machine
when performing adjustment work in the
hydraulic system.
Do not change the setting of pressure relief
valves.
Drain the hydraulic oil at operating temperature
– danger of scalding!
Any hydraulic oil must be collected and dis-
posed of in an environmentally friendly way.
Always collect and dispose of hydraulic oils
separately.
Do not start the engine after draining the
hydraulic oil. Once all work is completed (with
the system still depressurized!) check all con-
nections and fittings for leaks.
Hydraulic hoses must be visually inspected at
regular intervals.
Do not mix up hoses by mistake.
Only genuine BOMAG replacement hydraulic
hoses ensure that the correct hose type (pres-
sure range) is used at the right location.
3.10.3 Working on the engine
Do not work on the fuel system while the
engine is running - danger to life due to high
pressures!
Wait until the engine has stopped, then wait
another approx. 15 minutes.
Keep out of the danger zone during the initial
test run.
In case of leaks return to the workshop immedi-
ately.
Drain the engine oil at operating temperature –
danger of scalding!
Concerning your safety – Maintenance work
BW 213 D-5 55