Fayat Group BOMAG BW 213 D-5, Operating Instruction, Maintenance Instruction

Page: 187 / 222

8.9.7 Retightening the fastening of the axle on the frame
1. Check all fastening nuts on axle mounting
bolts for tight fit.
8.9.8 Tighten the wheel nuts
1. Tighten the wheel nuts cross-wise, tight-
ening torque: 550 Nm (405 ft·lbs).
8.9.9 Checking the ROPS
On machines with cabin the ROPS
(roll over protection structure) is an
integral part of the cabin.
All bolted connections must comply with the
specifications and should be absolutely tight
(observe the tightening torques).
Screw and nuts must not be damaged, bent or
deformed.
Unusual movements and noises (vibrations)
during operation are signs for damage or loos-
ened fastening elements.
Fig. 150
Fig. 151
Maintenance – Every 1000 operating hours
BW 213 D-5 187