Fayat Group BOMAG BW 213 D-5, Operating Instruction, Maintenance Instruction

Page: 180 / 222

9. Slightly loosen the fastening screws of the
generator V-belt tensioning device.
10. Slacken the V-belt by the clamping screw,
so that the V-belt can be taken off.
11. Take the V-belt off.
12. Install the new V-belt and tighten it
Ä
Chapter 8.7.2 „Service the belt
drive“ on page 156 .
8.9.2 Check the engine mounts
Protective equip-
ment:
n Working clothes
n Protective gloves
1. Park the machine in secured condition
Ä
Chapter 6.7 „Park the machine in
secured condition.“ on page 115 .
2. Allow the engine to cool down.
3. Check air intake and exhaust manifold fas-
tenings for tight fit.
4. Check sockets and clamps between air
filter, exhaust turbocharger and charge air
line as well as the lubrication air line for
tight fit and leaks.
5. Check fastening screws on oil sump and
engine mounts for tight fit.
6. Check condition and tight fit of engine
pillow blocks.
8.9.3 Replacing the hydraulic oil filter
Perform this maintenance work at
the latest after one year.
Fig. 141
Maintenance – Every 1000 operating hours
BW 213 D-5 180