Fayat Group BOMAG BW 213 D-5, Operating Instruction, Maintenance Instruction

Page: 142 / 222

NOTICE!
Danger of engine damage!
– The admixture of petroleum and
the addition of "flow enhancing
additives" (fuel additives) is not
permitted.
8.3.2.3 Storage
Even traces of zinc, lead and copper can cause
deposits in the injection nozzles, especially in
modern Common-Rail injection systems.
Zinc and lead coatings in refuelling systems
and fuel lines are not permitted.
Copper containing materials (copper lines,
brass items) should be avoided, because they
can cause catalytic reactions in the fuel with
subsequent depositing in the injection system.
8.3.3 Coolant
8.3.3.1 General
For fluid cooled engines the cooling fluid must
be prepared by admixing a cooling system pro-
tection agent to the fresh water and should be
checked within the specified maintenance inter-
vals.
This prevents damage caused by corrosion,
cavitation, freezing and overheating.
Maintenance – Fuels and lubricants
BW 213 D-5 142