Operation
BOMAG
28
BPR 70/70 D
4.7
Emergency starting with
safety crank handle
i
Note
This starting procedure should only be used in
case of a defective, discharged or missing battery.
Fig. 23
l
Turn the ignition key to position I (Fig. 23), the
warning buzzer does not sound.
i
Note
With the ignition switch in position I the battery is
charged when the engine is running, as long the
battery charge level is at least 9 V.
Fig. 24
l
Pull the decompression lever (Fig. 24) in direc-
tion of arrow to the end stop. The compression
lever clicks noticeably into place.
Fig. 25
l
Set the throttle lever (Fig. 25) to vibration step
1.
Fig. 26
l
Open the rubber cover.
l
Take the safety crank handle 1 (Fig. 26) out of
the bracket.
l
Insert the safety crank handle.
Go to
Discount-Equipment.com
to
order your parts
