Fayat Group BOMAG BF 700 C S500, Service Manual

Page: 18 / 31

NOTICE!
Damage to the exhaust gas aftertreatment
system!
Filling the AdBlue ® /DEF tank with cleaning agent
or other operating media or fuels, mixing in addi-
tives or diluting AdBlue ® /DEF will damage the
exhaust gas aftertreatment system.
Use only AdBlue
® /DEF as per DIN 70070/ISO
22241.
In case of incorrect filling you should contact a
qualified expert workshop.
If AdBlue
®
/DEF comes into contact with spray
painted or aluminium surfaces, you should rinse off
the affected areas immediately with lots of water.
1.3.3.2 Low outside temperatures
AdBlue ® /DEF freezes at a temperature of approx. -11 °C (12 °F).
Winter operation is also guaranteed at temperatures below -11 °C
(12 °F).
At low temperatures crystals may form on the wound hose
between engine and exhaust silencer. Such crystallization does not
impair the function of the exhaust gas aftertreatment. If necessary
just remove the crystals with clear water.
1.3.3.3 Storage
Use only tanks made of the following material to store AdBlue ® /
DEF:
n Cr-Ni steels acc. to DIN EN 10 088-1/2/3
n Mo-Cr-Ni steels acc. to DIN EN 10 088-1/2/3
n Polypropylene
n Polyethylene
General – Fuels and lubricants
BF 700 C S500 18