FAW J6 Jiefang IV Series, Operation Manual

Page: 29 / 217

21
Jiefang J6 China IV, China V series instruction Correct operation
Info
rm
a
tio
n
to
th
e
d
riv
er
Engine fault alarm lamp
It is illuminated when the engine electrical control
component goes wrong.
Caution
When the engine fault warning lamp is normally on,
the electric control system will conduct the rotation
speed and vehicle speed limit control of the engine
and vehicle appropriately according to the hazard
degree of the fault. At this time, the vehicle should
be driven at a low speed to the nearest service
station and repaired by a professional maintenance
staff.
Coolant level alarm lamp
The engine coolant is insufficient, the alarm lamp
is ON.
When the lamp is on, the vehicle shall be parked
and inspected at a safe site and measures shall be
taken:
- Stop the engine to lower the coolant temperature.
- Check the radiator and the lines for water leaks.
- If there is any leakage, please contact FAW
Maintenance Station nearby.
Warning
The expansion tank pressure cap must not be
opened before the water temperature drops. When
opening, cover it with a cloth, loosen it slowly, and
then open the pressure cap after pressure relief to
avoid being scalded with hot water.
Coolant temperature alarm lamp
When the engine is overheated, the alarm lamp is
on.
When the lamp will be illuminated, the vehicle
shall be driven to the safety site for inspection.
Warning
Operate the engine at a speed slightly above the idle
speed in order to decrease the engine temperature.
Never close the engine for natural cooling.