Operation
> Press and hold the button
2
until the
lamp turns on.
> When the light turns on press the button
repeatedly for the different light modes:
ON > Candlelight > OFF.
> Twist the Button
2
to adjust brightness
level in ON mode (not available in candle
light mode).
> Indicator
3
flashes red twice when
reaching lowest level; flashes green twice
when reaching highest level.
> Press the button
2
once for OFF (when in
any mode for longer than 5 seconds).
Battery Type
1 x 3.7V 4000mAh 1A / 1.2 A Li-Polymer
rechargeable battery
7
[Included]
or 3 x 1.5V D Alkaline Batteries
8
[Not Included]
Bulb Type
LED Filament Bulb (E14 DC 3V)
1
Replacement Bulb available from your
retailer. Never use it on household lighting
with AC voltage or over DC 3V voltage.
Users must use manufacturer’s replacement
bulb on L0818. Using other bulbs may cause
functional problems or permanent damage
to the lantern or the bulbs.
WARNING!
• Do NOT look directly into the LED light for more
than a few seconds.
• Do NOT allow children to use LED light unless under
the supervision of an adult.
• Remove the batteries if not using the lantern light
for long period or before storage.
• The lantern could become extremely hot after
extended use. Switch it OFF or to Low Brightness
Level if the lantern becomes too hot.
Important
• Recharge the battery every 3 months if it is not
being used for a long time or recharge it after use.
• For optimal performance, charge before use.
• Use the unit regularly in order to maintain the
rechargeable battery in good condition.
• Do not dispose of the unit into fire or dismantle it
under any condition.
• Do not short circuit the battery. Permanent
damage to the battery may result.
• Never insert any objects other than the included
cable into the USB port of the battery pack.
• Never charge the battery in extremely high
temperatures.
• Using the product in extreme conditions may
affect the lifetime.
• Battery should always be stored in a cool and
dry place.
• Only use manufacturer’s replacement parts.
• Ensure adequate ventilation when the LED lamp
is on.
• Make sure the LED lamp has cooled down
completely before touching it.
ENGLISH
SPECIFICATIONS
