Lightmeter LM10
7.7. Transferring and Displaying Datasets
In order to load the recorded measurement data from the Lightmeter LM10 to the PC, you connect
the LM10L with the bundled USB-cable with one of the PC’s USB-slots.
Turn on the LM10L and switch to the USB-mode by pressing the
Audio/USB
button for two
seconds; on the display appears the message:
″USB-mode: waiting for PC″
.
Choose
Device/Load Dataset
in the menu-bar or
click on the icon
Load
.
Now, the dataset window shows the datasets stored on the LM10L.
The name of the dataset, start and end time of the record and the filter function are to see. The
name of the dataset is composed of
″DM″
for
Continuous measurement
and
″EP″
for
Single-spot
followed by the number of the dataset.
Double-click the dataset with the mouse pointer to mark it and using the button
Load
transfers the
dataset from the LM10L to the PC.
The datasets remain stored in the LM10L after the transfer. If all datasets should be deleted, this
can be achieve this by
Delete data
or the icon
Delete
. Alternatively, the datasets stored on the
LM10L can be deleted with the menu function
Data logger
→
Data storage
→
Delete.
While deleting
the data storage, all stored datasets are deleted.
24
