25
5670480 (FTW-5670480 - 4.0) Boat Ramp Kit
Copyright © FAUN Trackway Limited
5. OPERA
TION
The lip can be placed either side of the C40 / C90 Trackway
®
panel.
Fig. 5-22 Leading Edge Anchor Plate placed into groove of C40 / C90 Trackway
®
Secure Leading Edge Anchor Plates and Side Edge Anchor Plates with Screw Anchors.
Fig. 5-23 Leading Edge Anchor Plate secured with Screw
846
Fig. 5-24 Side Anchor Assembly
Side Anchor Assembly
Place Base Plate under the C40 / C90 Trackway
®
panel, aligning the weld nut with the panel
hole. Place the Top plate over the top of the C40 / C90 Trackway
®
panel, aligning the hole
with the nut of the Base Plate.
Lock with the locking washer and M12 Hex Head Bolt and tighten using the 19mm spanner.
Insert Screw Anchor into Side Anchor Assembly and tighten down using the 25mm spanner.
In difficult / rocky ground, you may need to create a pilot hole by pre drilling the ground. The
stake can then be inserted and grouted (if required).
Summary of Contents for C40 Trackway
Page 1: ...BOAT RAMP KIT USER MANUAL Part Number 5670480 Ref FTW 5670480 Rev 4 0 ...
Page 2: ......
Page 5: ......
