Faun C40 Trackway, User Manual

Page: 20 / 42

5670480 (FTW-5670480 - 4.0) Boat Ramp Kit Copyright © FAUN Trackway Limited
20
5. OPERA
TION
2. Slide
1. Rotate
Fig. 5-14 (C90) Lift and slide these Locking Bolts / TamperProof Locking bolts into the open position
Attach the Hand Line Assembly to the outside edge of the panel to be removed by clipping it
through the hole. Ensure that the karabiner gate is closed.
Slowly pull the panel out of the C40 / C90 Trackway ® Boat Ramp until it is free and clear. If
splitting at a row of Half Panels, repeat for the other panel.
Recover the remaining C40 / C90 Trackway ® Boat Ramp as required.
5.10 Joining C40 / C90 Trackway
®
Boat Ramp
Equipment Required:
– Spare Full Panel or Pair of Half Panels (if unavailable remove panel(s) from the deployed
C40 / C90 Trackway
®
Boat Ramp);
– Hand Line;
– Sledge Hammer.
5.10.1 General
Sections of C40 / C90 Trackway
®
Boat Ramp can be joined to create longer continuous lengths
or to enable the recovery of a section which has been previously split. Note that only male
panel ends can be joined to female ends and vice versa.
Fig. 5-15 C40 Male and Female Panel ends