Faulhaber MC 3603 S Technical Manual Download Page 49

Page: 49 / 79

1st edition, 20.04.2021

7000.05072, 1st edition, 20.04.2021

7000.05072

Installation

DANGER

The function of the Motion Controller is not ensured if the visual inspection criteria are not
satisfied.

If the function is not ensured, the drive may start unexpectedly. Depending on the use of the

Motion Controller, this can lead to severe or fatal injury.



Do not start up the Motion Controller.

DANGER

During operation, the drive system produces mechanical forces and movements.



Protect the drive system and components driven by the drive system from being
touched.

4.1.2

Attachment via the side plates

NOTICE

Installation of the Motion Controller on a surface that is not flat can lead to the Motion
Controller becoming damaged.



Install the Motion Controller on a flat surface.

Fig. 9:

Attachment via the side plates



Attach the Motion Controller (2) to the mounting plate with screws (1) as described in
Fig. 9.

Screw

Motion Controller

Summary of Contents for MC 3603 S
















































































Search results

Summary of Contents for MC 3603 S

Reviews:

Related manuals for MC 3603 S

Brands by name

Popular brands

Faulhaber MC 3603 S, Technical Manual

Search results

Summary of Contents for MC 3603 S

Reviews:

Related manuals for MC 3603 S

Brands by name

Popular brands