Faulhaber 2232 BX4 IMC, Technical Manual, Page: 12 / 41

1st edition, 9.04.2024 7000.05073, 1st edition, 9.04.2024 7000.05073
Product description
12
3 Product description
3.1 General product description
The drive systems integrate a brushless DC servomotor, a high-resolution actual value
encoder and a Motion Controller in a compact, complete drive unit.
The motor commutation is achieved electronically so that the service life of a FAULHABER
Motion Control Systems depends mainly on the service life of the motor bearings. FAUL
-
HABER uses high-precision, preloaded ball bearings in all of its systems with integrated
Motion Controller. The following factors influence the service life of the bearings:

Static, dynamic, axial and radial bearing loads

Thermal environmental conditions

Speed

Vibrational and shock loads

Level of precision to which the shaft is coupled to the given application
For highly dynamic servo applications requiring very high torque in the most compact
dimensions, the FAULHABER BX4 Series 4-pin DC-Servomotors are integrated. They have
the following features:

Robust design

Adhesive-free construction

Long service life

Ideal for hostile ambient conditions (e.g. extreme temperatures and high vibrational
and shock loads)
Thanks to their robust construction and their compact design, the FAULHABER Motion Con -
trol Systems of the V3.0 generation are ideal for use in the markets described in chap. 2.1,
p. 8.
As an option, a common power supply for motor and control electronics is possible.
Additional programming adapters and connection aids are available.
Special preconfiguration of the modes and parameters is possible on request.