Version 6
Operating instructions
CCS Silver
Firmware 2021-01-14
Page:
13
of:
72
FAUDI Aviation GmbH, Scharnhorststraße 7 B, D-35260 Stadtallendorf
Manual_CCS_silver_Eng_
operation_version6.docx
3
Operation
3.1
Connection Settings
You’re able to connect a Computer or a Smartphone or Tablet PC to the CCS via Local Area
Network. This is necessary for setting up the system. Also, the refuelling process can be
guarded via the so-called web visualisation .
The computer or smartphone and the CCS must be in the same IPv4 Network.
For connecting a Smartphone or Tablet PC, a Wi-Fi access point is required.
For an easy connection with a computer, you only need an Ethernet cable (Cat.5 or better).
3.1.1 Direct connection via Ethernet Cable
If you want to connect the computer directly
without
using a router with DHCP Server, follow
these instructions:
1. Take your computer / laptop
2. Open the settings of your Ethernet connection (Network Adapter).
3. Choose Internet Protocol Version 4 (TCP/IPv4)
4. Open properties
-
Activate static network settings (no DHCP)
-
Change IP address to
192.168.10.100
-
Change Subnet mask to
255.255.255.0
-
Delete gateway settings
-
Delete DNS settings
-
Settings should be in accordance to the right picture
-
Press “OK”
