FATEK SD3 Series, Instruction Manual, Page: 20 / 396

14 SD3 Series Instruction Manual
1. Introduction
2. Overview
2. Danger Signs
HOT SURFACE WARNING
ELECTRIC SHOCK WARNING
FG
(FRAME GROUND/PROTECTIVE GROUNDING)
SYMBOL
DANGER・CAUTION
NO IMPACT/NO DISASSEMBLY LABEL
Do not touch the product during operation or for
a while afterward, or you may get burned from the
heat.
Do not touch the amplifier during operation and
within 5 minutes after operation, or you may get
injured.
Incorrect use of the amplifier may cause injury or
damage. Avoid misuse or improper handling of the
amplifier, or injury will result.
Be sure to perform grounding with the screw
located at this sign.
Do not remove the encoder cover. Never overhaul
the encoder.
Beating the encoder cover will cause encoder
failure.
Do not apply strong impact to the motor and its
shaft