FATEK SD3 Series, Instruction Manual, Page: 15 / 396

9
1
SD3 Series Instruction Manual
Introduction
1. Introduction
1. Important Safety Instructions
1. Important Safety Instructions
4. Maintenance and Inspection
Never overhaul the product.
For safe use of the product, be sure to perform regular maintenance and inspection
on the amplifier and motor.
Ensure the electrical and mechanical safety before each inspection.
This product assumes the following operating conditions.
Ambient Temperature
Average annual temperature of 30° C
(not exceeding the rated temperature range)
Load Factor 80% max
Operating Hours 20 hours a day
Maintenance
For safe use of the product, perform daily and periodic inspections.
Daily Inspection: Check the following before each operation:
• Ambient temperature, humidity and atmosphere
• No foreign objects or dust; especially ensure that nothing is blocking the vent holes
• No excessive bending or damage of the wires
• Power supply voltage is within the specifications
• No foreign objects in mobile components of the device and the range of motion.
• No unusual noise or smell right after the machinery starts.
Periodic Inspection: Check the following at least once a year:
• No loose clamp screw problems in the amplifier and motor.
• No deformation or discoloration in the amplifier, motor, cables, and terminal blocks due to overheating.
• No looseness in wiring fixings and terminal block screws.