31
The
icon is modify; when pressed, it will change to the
icon, and the
highlighted parts will turn red, then you can modify above the field and then press
Apply to complete the modification. To delete an authorization data, click the
icon directly to delete it.
3.2.5 Port Mapping
When the operation mode in the basic settings page is set as Modbus/Fatek client
mode, an extra port mapping page will appear. The following screen will appear after
clicking it with the mouse:
When setting is required, users can enter the mapping data in the New/Edit-Port
Mapping fields. The following is the meaning of each field:
Local Station:
Represents the remote PLC’s designated station number at the
local end.
Remote Station:
Represents the actual station number of the mapping network
remote PLC.
Remote IP:
The IP address of the remote PLC.
Remote Port:
The IP port number of the remote PLC.
Group Size:
A group of station numbers mapping can be defined every time for
this setting; for example, if you want to set the local station numbers 10~19 to
map the remote station numbers 20~29, and the remote IP is 192.168.1.3, you
can set Local Station=10, Remote Station=20, Group Size=10, Remote
IP=192.168.1.3, the Remote Port is generally set to 500. A maximum of 18 group
mapping can be set within the CBEH.
IP:
Consecutive network addresses. When the Group Size is specified, its
contents will be a consecutive network address and a fixed station number
configuration, as shown in the figure below:
Summary of Contents for CBEH
Page 1: ...Ethernet Communication Board CBEH CBEH 0A CBEH 2A ...
Page 44: ...44 ...
