background image

Thank you for purchasing the FATAR Studio-90 Plus, the finest feeling master controller on the

market today. The action is a result of many years of engineering that went into the keyboard
mechanism. There are actually hammers that strike a surface that simulates a piano string.

The FATAR Studio-90 Plus master controller is very simple to operate once you understand its

capabilities. Even though the controller seems to be always in split mode, you can layer or split
one, two, or three sounds across the entire length of the keyboard. However, you must be aware of

the specific use of each parameter to get the desired results.

FEATURE LIST! The following is a feature list of the ST-90 Plus master keyboard controller.

- Power Supply: 9 VDC 500mA

- 88 Note Weighted Hammer Action Keys
- Key measurements like a real piano
- Dynamic Range (00-99)
- Velocity Sensitivity Release (00-99)
- Three Zones Programmable
- Half-tone transposition
- Octave transposition

- Three MIDI Outputs
- Foot-Switch Control
- Program Change Footswitch
- Pitch and Modulation Wheels
- Outputs on all l6 MIDI Channels (three channels at one time)
- 100 Performance Programs (00-99)
- Two digit numeric display

- Beautiful Cabinet Design
- Also available in sturdy case road case

Summary of Contents for ST-90 Plus












Reviews: