background image

Fat Shark 

 11 

 RC Vision Systems 

 

Trouble shooting 

Observation 

Possible cause/solution 

No image, display is completely 
dark 

- No power supplied.  Check power connections. 

No image, display is glowing 
dark grey 

- If using wireless module, turn on RX power on bottom of 
headset. 
- If using AV in cable, check video source. 
- Ensure TX is on and camera connections solid 

Static on all channels 

TX has no power.  Check to ensure TX LED is lit. 

No image on one channel, static 
on the rest. 

Tx is working normal.  Camera is not connected or lens 
cap left on 

Lots of interference lines 
(horizontal lines)  

- Choose a cleaner channel. 
 

Lots of interference lines 
(horizontal lines) when using 
5.8Ghz receiver 

Check to see if cause is harmonic interference from 
2.4Ghz RC controller (turn radio on/off). 
- Use CH1 on TX/headset (Ch1 not affected by 2.4Ghz) 
- check correct frequency antenna is used 

Battery DOA 

Low  voltage  switch  tripped,  read  notes  (2)  in  battery 
section 

Battery won’t charge 

Low voltage switch tripped, read notes (2) in battery 
section disengaged from socket (open and reseat). 

Short range 

- Ensure 5.8Ghz antenna was installed 
- Check for other sources of interference 
- Ensure transmitter has clear LOS to headset. Test in 
wide open area, away from any obstructions 

Short range (con’t) 

- Ensure that a compatible antenna is installed. Do not 
use other manufacture antenna, they may be dual band 
or may be reverse SMA (no center pin to connect to 
receiver) 

White dots on LCD display 

You were careless and left goggles exposed to sun.  Sun 
burnt off LCD color filter. 

Warranty 

The system can be exchanged for a new unit within 30 days for any manufacturing defects if 
returned  in  new  condition.   The  video  headset  will  be  warranted  for  repair  for  2  years  if  no 
signs of excessive use.   Buyer will be responsible for shipping costs.  If beyond the warranty 
period we will provide repair services.  
 
Your 1

st

 point of contact for all warranty issues is your retailer.  We also run a support forum 

for all technical issues at: 

http://fpvlab.com/

 SPONSORS GATE/ FAT SHARK  

Post your questions there and they will be answered by our technical staff or peers. 

Summary of Contents for TELEPORTER V5












Reviews: