Intended
use of the module
CPC307
C P C 3 0 7 U s e r M a n u a l
22
© 2 0 2 2 F a s t w e l v . 0 0 6
3
Intended use of the module
A diagram showing the connection of the necessary devices to the module is shown in Figure 3.1.
Figure 3.1. Connection of external devices to the CPC307
The devices necessary for module power on and testing its functionality are:
- a power supply source with +5 V output voltage and at least 2.1 A current connected to the
PC/104 connector or to the XP22 auxiliary power connector;
- a console PC operating in terminal emulation mode can act as a display device. One of the RS-
232 interfaces can serve as the console port (to do so you must select the appropriate port in the
BIOS Setup menu). Console I/O port is preset to COM1 (RS-232 mode) with the parameters
115200, 8, n, 1. The default mode of the console is only input/output messages regarding the
POST (Power On Self Test) procedure passing. If you need to work with the operating system
through the integrated console, you must change the mode of the console Redirection After BIOS
POST="Always", Terminal Display Mode="Recorder Mode" in the BIOS Setup menu. The more
detailed description of the console settings are given in Section 5.2.3 Remote Access
Configuration (Console I/O settings).
– The CPC307-02,-03,-05 modules come with the FreeDOS operating system preinstalled on an
ATA flash drive.
