FASTRON. FTM1 Series, User Manual

Page: 29 / 37

- 29 -
Appendix A: Function parameter table
“R”
：
Indicates that the parameter displays the actual test record value and cannot be changed;
“W”
：
Indicates that the setting value of the parameter can be changed when the power controller is
in shutdown and running state;
“T” ：
Indicates that the setting value of the parameter cannot be changed when the power controller
is in the running state;
“X” ：
Indicates that the parameter is a "manufacturer parameter", which is only set by the
manufacturer and cannot be operated by the user;
Function
code
Name Range Factory
value
Property Description
0
：
Basic information
0.01 Running state
0
、
1 - R
0:Stop
1:RUN
0.02 A/M state
0
、
1 - R
0: (1.11) M input
1: (1.10) A input
0.03 Uin
0.0
～
3276.7 - R
Input voltage
0.04
Uout 0.0
～
3276.7 - R Output voltage
0.05 Iout 0.0
～
3276.7 - R Output Current
0.06 Pout 0.00
～
327.67 - R active power
0.07 Power factor
0.00 ～ 1.00 - R
0.08
Start signal
0
、
1
- R
Terminal RUN state
0.09 IN1 input (%)
0
．
00
～
100.00% - R
Terminal IN1
4~20mA input
0.10 IN2 input (%)
0
．
00
～
100.00% - R
Terminal IN2
0~5V / 0~10V
0.11
Pannel input (%) 0
．
00
～
100.00% - R
Expansion
Pannel input
FTM1 TYPE SCR power controller